Top seller
Any questions?
Request CAD data or ask a question about the product
No results were found for the filter!
Permanent magnetic chuck SPRM
Permanent magnetic chucks type SPRM, with reinforced ceramics magnetic system and max-pole pitch are used for the clamping of massy and heavy workpieces. The magnetic force can be regulated stagelessly; centred grooves, which are...
Permanent magnetic clamping block SP-PMBL
SP-PMBL magnetic clamping blocks are equipped with two opposing, independently switchable clamping surfaces. The neodymium magnet system with a fine pole pitch of 1.5 + 0.5 has a depth of approx. 5 mm and is suitable for clamping small...
Permanent magnetic clamping block SP-MH
SP-MH permanent magnetic clamping blocks have 2 or 3 magnetic clamping sides, which are not switchable. They are used for clamping of finest pieces or badly magnetisable material, like high-alloyed chrome steels or carbid metal. After...
Electro-permanent magnetic plate SPUGP
SPUGP electro-permanent magnetic plates with 15 + 3 mm parallel pole spacing are suitable for securely and precisely clamping workpieces from 40x40x10mm. The electro-permanent magnet system does not heat up during long clamping times and...
Electro-permanent magnetic block SP-BLOCK HD50
The SP-BLOCK can be used as a vertical clamping level on a horizontal magnetic clamping plate or it can be installed on the machine desk. It's good for clamping plates to work on their front side or as a quick-change-base on The SP-BLOCK...
Electro-permanent magnetic block SPQX-BLOCK HD70
SPQX-BLOCK is a double sided active, flexible deployable magnetic clamping block. Each side is provided with two or four 70 mm SPQX-Poles. So the total clamping power is 15.6 / 31.2 kN. It can be used for flexible clamping of workpieces...
Electro-permanent magnetic plate SPQX-HD70
Version with 70×70 mm poles for working with large workpieces. It's available with 51 mm height or 68 mm height. SPQX-HD70 are compatible with the mostselled magnetic systems for heavy chipping worldwide. Clamping slots on two sides and...
Electro-permanent magnetic plate SPQX – LOCK HD50
SPQX-LOCK magnetic clamping plates are equiped with a strong frame structure. The construction height is 68 mm and the plates can be drilled 22 mm deep and milled 12 mm. It's perfect for inserting reference elements into zero-point...
Electro-permanent magnetic plate SPQX - HE50
Very light and thin (51 mm height) magnetic clamping plate with SPQX technology and fifties poles. The HE50 is made for tool construction and mechanican engineering. It's good for clamping of small and thin work pieces on fast and light...
Electro-permanent magnetic chuck SPPFR
SPPFR magnetic chucks are used for the final machining of rings and for hard turning or grinding. The strengthened ceramic magnet system also allows to demagnetize high-alloyed and hardened materials after processing. The monoblock-body...
Electro-permanent magnetic chuck SPFFP/C
SPFFP/C electro-permanent magnetic round chucks with fine pole pitch combine the ad - vantages of permanent and magnetic round chucks. The clamping plate does not heat up during long clamping periods, has a very controlled magnetic field...
Magnetic sine plate SPFS
SPFS sine plates with built-in SPSF magnetic plates convince with good workmanship and compact design. The base body is hardened to approx. 50 HRC. The angle is set according to the sine principle with the help of gauge blocks. It is...
Viewed