Filter
Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
Top seller
Movable center jaws No. B209800400 for MZR Center jaws, movable
Fixed center jaw No. B209800475 for MZE Center jaws, fixed
workpiece support Workpiece support
Collet MK No. B900501186 Collet MK
Adapter plate MK Adapter plate MK
Base B209800111 Base cube
workpiece stop Workpiece stop
magnetic stop Magnetic stop

Any questions?

Request CAD data or ask a question about the product
Filter
1 From 2
No results were found for the filter!
Adapter plate MK Adapter plate MK
With the adapter plate, the manual chuck MK is positioned on the index clamping unit ZPS 20 and mounted.
workpiece support Workpiece support
Collet MK No. B900501186 Collet MK
The collet are fastened to the main element by just one centrically applied screw, and can be therefore quickly replaced. The workpiece contour is milled into the collets with a minimum clamping depth of 2 mm. Because the clamping force...
Base B209800111 Base cube
The base cubes can be inserted directly as basic elements on the machining table or can be positioned and screwed on a base plate. They shorten the Z-movement of the machining spindle during the process or enables the non-collision use...
Centering pin Z0100120C0 Centering bolt
The centering bolt is used to position clamping elements on the basic elements
double clamps Side clamp
The different side clamps are used to fix themechanical centre-clamping vises and compact vises. They have been specially designed for grid plates with SPREITZER grid hole system 20-M10
Fastening sets for T-slot 12 mm / 14 mm / 18 mm Mounting sets for T-slot 12 mm / 14 mm / 18 mm
Sets for fastening the mechanical centreclamping vises or compact vises on T-slot 12 mm, 14 mm resp. 18 mm.
Operating key with ratchet function Wrench with ratchet function
Wrenches with ratchet function for manual operation of centre-clamping vises and clamping tools.
Torque wrench with setting scale Torque wrench with adjustment scale
Required clamping force The clamping force of the centreclamping vises and compact vises depends on tightening torque. We recommend to use a torque wrench. The adjusted tightening torque depends on influencing variables for example...
Movable center jaws No. B209800400 for MZR Center jaws, movable
Movable center jaws for centre-clamping vises. For clamping of two workpieces. The soft version can be machined and fitted on the workpiece.
Fixed center jaw No. B209800475 for MZE Center jaws, fixed
With the conversion kits, you can easily convert your existing centre-clamping vise MZR or MZE in a double vise.The workpiece clamping is then carried against a fixed center Third hand function: The first workpiece is already held, while...