Top seller
Any questions?
Request CAD data or ask a question about the product
No results were found for the filter!
Pin support
The pin support is an universal work piece support. If you press the work piece into the support the easy flexible pins will fit to the work piece shape. By clamping off the pins the „negative shape“ can be fixed and enables a...
Prism support
The prism support is used for cylindrical workpieces. They can be mounted in pairs on the carrier plate or individually on elements with .basic chucking spigot.
Hold down clamp
The hold down clamp is used together with the receiver pin. The clamping force can be mechanically influenced by a second position of the clamping spring.
Compound resin receiver jaws
Compound resin receiver jaws are used for creating part-specific, form-fitted workpiece forming jaws.
Compound resin
Compound resin for use with compound resin receiver or compound resin receiver jaws for reating part-specific, form-fitted workpiece supports or forming jaws. Tensile strength: 300 kg/cm2 Compression strength: 800 kg/cm2 Processing: Mix...
Carrier plate
The carrier plate carries up to two pin supports or the according components on the connecting bolts. The elements can be moved steplessly by 2 x 50 mm.
Hold down clamp, complete
The hold down clamp including location bolts and slidge rail can be mounted with the pin support. The clamping force can be mechanically influenced by a second position of the clamping spring.Upper clamping spring can be swivelled 360º.
Compound resin receiver Ø60
Compound resin receiver for the preparation of part-specific work piece supports. It can be fastened onto the .basic connecting bolt or the swivelling connecting bolt quickly and easily by means of the connecting plate provided.
Magnetic support
Support for holding magnetizable workpieces. It can be fastened onto the connecting bolts or the swivelling connecting bolts quickly and easily by means of the onnecting plate provided.
Viewed