- Gauge accurate clamping
- All-round precision ground
- Pull-down system
- No lifting of the workpiece
- No vibration during machining
Precision tool maker vise EHS with spindle
The precision vises of the EHS design are intended for use on grinding machines, jig boring machines and other precision machines, and as universal clamping devices in the measuring and testing room. The vises can be used overleaf on all four contact surfaces and offer an extremely large span. The clamping jaw contains a horizontally ground-in V-block.
pull-down system
The movable clamping jaw is pulled down by the clamping pressure that occurs. This causes a significantly reduced lifting of the workpiece during processing. No knocking down of the workpiece, no "rattling".
Any questions?
Request CAD data or ask a question about the product- Order number: B601500001
Choose version
| Version | Order Number | Clamping width 1 [mm] | Clamping width 2* [mm] | L [mm] | B [mm] | H [mm] | T [mm] | Weight [kg] |
| EHS 45 | B601500001 | 65 | - | 150 | 45 | 45 | 20 | 1,5 |
| EHS 65 | B601500002 | 100 | 150 | 220 | 65 | 75 | 37 | 4,5 |
| EHS 100 | B601500003 | 140 | 200 | 270 | 100 | 80 | 40 | 9,5 |
| EHS 100-2 | B601500021 | 140 | 200 | 270 | 200 | 80 | 40 | 20,0 |
| EHS 125 | B601500004 | 160 | 220 | 300 | 125 | 88 | 43 | 14,5 |
| EHS 160 | B601500018 | 225 | 285 | 370 | 160 | 88 | 43 | 20,0 |
| EHS 100 VA | B601500005 | 140 | 200 | 270 | 100 | 80 | 40 | 9,5 |
Viewed